Table of Contents
Advertisement
3-64
Instruments and controls/Multi function display
! Hazard warning flasher setting
1. Perform the preparation steps accord-
ing to "Preparation for car settings" F3-62.
2. Operate the "
" or "
select the "Hazard Warning Flasher" item.
Then pull the " /SET" switch toward you.
3. The current setting will be displayed.
Pull the " /SET" switch toward you to
enter the selection mode.
" switch to
4. Select "On" or "Off" by operating the
"
" or "
" switch. Then pull the " /SET"
switch toward you.
5. Select "Set" by operating the "
switch, and confirm the setting by pulling
the " /SET" switch toward you.
6. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. For more
details, contact a SUBARU dealer.
"
Advertisement
Table of Contents
