Interruption Screen - Subaru Crosstrek XV Owner's Manual

If there is no warning message, the self-
check is complete without notification.
Example of notification
If there is a warning message or a
maintenance notification, the color of the
icon corresponding to the item will turn
yellow and the warning message or the
maintenance notification will be displayed.
Take the appropriate actions based on the
messages indicated.
NOTE
. The self-check screen can be set to
on or off. For details, refer to "On/Off
setting" F3-59.
. After performing the maintenance,
change the setting of the correspond-
ing maintenance item. For details, refer
to "Maintenance settings" F3-57.
. The maintenance notification screen
will be displayed under either of the
following conditions.
– The period of time remaining
until the registered notification date
is 15 days or less.
– The total driving distance remain-
ing until the registered notification
distance is approximately 311 miles
(500 km) or less.
. The maintenance notification screen
will be displayed until either of the
following conditions is satisfied.
– The period of time passed after
the registered notification date is 15
days or more.
– The total distance driven after the
registered notification distance is
approximately 311 miles (500 km) or
more.
Instruments and controls/Multi function display
& Interruption screen
Warning information (display example)
Useful messages, such as reminder in-
formation, vehicle information, warning
information, etc. may interrupt the current
screen and appear on the display accom-
panied by a beep. Take proper action
according to the message.
The warning screen will return to the
original screen after a few seconds. If
the warning screen can be displayed
again, an information reminder " " will
appear on the upper left part of the
display. To recall the message marked
with " " on the display, pull the " /SET"
switch on the steering wheel toward you.
3-31
– CONTINUED –