Panasonic WORKIO DP-C262 Scanner Manual page 13

6
Insert a PCMCIA/PC Card Adapter
with a memory card.
① Push on the slot cover to open it.
② Insert a PCMCIA/PC card into the PCMCIA/
PC Card slot as illustrated. (Label side up)
7
Select "PC Card".
Only one storage device can be selected at
a time. When the "PC Card" is selected as a
storage device, the scanned image cannot
be saved to the SD Memory Card or Hard
Disk Drive at the same time.
8
Press the Start key.
The scanned image is saved into the
PCMCIA/PC Card.
The scanned data is saved on the following
directory of the memory card.
Directory:
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
The data saved on the memory card in the
PC Card Adapter can be printed by this
machine or another DP-C262 or DP-C322.
For more details, refer to Printing from SD
Memory Card/PC in the Operating
Instructions (for Basic Operations). When
printing PDF data or high-compression PDF
data, install and set up the Memory Card
Print Utility. For details, refer to the Help of
the Memory Cart Print Utility on the
Document Management System CD-ROM.
9
Push the Eject button on the right side
of PCMCIA/PC Card slot, and then
remove the PCMCIA/PC Card
Adapter.
Eject button
Do not remove the PCMCIA/PC Card while
the Access Indicator is flashing.
10
Close the Slot Cover.
When canceling the operation, press the Stop key
on the Control Panel, and then select "Yes" on the
Touch Panel Display.
13