Dialling Stored Number - Geemarc DALLAS 100 VM Manual

USING THE PHONE

9 - DIALLING STORED NUMBER

- Lift the handset and await the dial tone.
- Press appropriate direct memory button M1,
M2, or M3. The stored number will be dialled out
automatically.
Or press the M button followed by the keypad 0
to 9 button under which the desired number is
stored. The stored number will be dialled out
automatically.
To register your stored phones numbers, use the
index located on the base.
10 - VOICE METER FUNCTION
Push switch to adjust voice level meter ON
and OFF .
On mode:
When unit is off-hook, the voice meter LEDs in-
side the memory card cover will indicate the out-
going voice level on telephone line.
Off mode:
When unit is off-hook, the voice meter is turned
off.
11