4 Replacement Procedures
4.16 CPU and Thermal Module
Removing the CPU and Thermal Module
Remove the CPU thermal module according to the following procedures and Figures 4.28 and
4.29.
CAUTION:
When removing the thermal module, keep the following in mind:
1.
The thermal module can become very hot during operation. Be sure to let it cool down
before starting the repair work.
2.
If you remove the CPU thermal module, please use soft cloth with alcohol to clean the
CPU and CPU thermal module. Reapply Shinetsu 7762 grease before installing the
CPU thermal module. If you use one new CPU thermal module, please make sure
remove the release paper first.
For UMA module
1. Disconnect the thermal fan cable.
2. Remove the four spring screws securing the thermal module to the motherboard, in the
sequence indicated in Figure 4.28.
Satellite M600/M640/M645/M647 Maintenance Manual
Downloaded from LpManual.com Manuals
Figure 4.28 Removing the Thermal Module spring screws
4.16 CPU and Thermal Module
4-42