Cleaning - BenQ MD SERIES User Manual

Cleaning

Warning
If you dropped any material or liquid such as water onto the monitor when cleaning, unplug the
power cable immediately and contact your dealer or the nearest service center. Always make
sure your hands are dry when unplugging the power cable.
Caution
•For safety reasons, turn-off the power switch and unplug the monitor before cleaning.
•Do not scratch or rub the screen with a hard object.
•Never use any of the following solvents on the display. Harsh chemicals may cause damage to
the cabinet, front glass, and the sensors.
• Alcohol/solvents at higher concentration > 5%
• Strong alkalis lye, strong solvents,
• Thinner Spray-type cleaner, Abrasive cleaner, acid
• Benzene
• Wax
• Detergents with fluoride
• Detergents with ammonia
• Detergents with abrasives
• Steel wool
• Sponge with abrasives
• Steel blades
• Cloth with steel thread
Cabinet
•Remove dirt with a lightly moistened cloth and a mild solvent detergent. Then wipe the cabinet
with a soft dry cloth.
•Do not apply spray liquid directly to the cabinet as excess liquid may cause damage to internal
electronics.
Cleaning 43