BenQ MD SERIES User Manual page 17

3. Connect the PC video cable.
Do not use both DVI-D cable and VGA cable on the same
PC. The only case in which both cables can be used is if they
are connected to two different PCs with appropriate video
systems.
To Connect the VGA Cable (selected models only)
Connect the plug of the VGA cable (at the end without
the ferrite filter) to the monitor video socket. Connect
the other end of the cable (at the end with ferrite filter)
to the computer video socket.
To Connect the DVI-D Cable
Connect the plug of the DVI-D cable (at the end without
the ferrite filter) to the monitor video socket. Connect
the other end of the cable (at the end with the ferrite
filter) to the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the DP Cable
Connect the plug of the DP cable to the monitor video
socket. Connect the other end of the cable to the
computer video socket.
The video cables included in your package and the socket
illustrations on the right may vary depending on the product
supplied for your region.
4. Connect USB devices.
Connect the USB cable between the PC and the
monitor (via the upstream USB port at the back). This
upstream USB port transmits data between the PC and
the USB devices connected to the monitor.
(MD210G only)
How to assemble your monitor hardware 17