Bluetooth Operation; Connecting External Appliances - Telefunken MC1001BM Instruction Manual

8.

bLUETooTH oPERaTIoN

External Bluetooth devices can be connected to the appliance through Bluetooth mode.
„
Press bT (31) on the remote control or press repeatedly
„
choose Bluetooth mode. The display (3) shows
Specific pairing procedures may vary with different Bluetooth devices. Refer to your
„
device's manual for further information.
Activate the Bluetooth function of the external device and search for Bluetooth devices.
„
Select MC1001bM from the Bluetooth device list. Follow the instructions shown on your
device's screen.
When the Bluetooth connection has been established, the display (3) shows
„
Files from your connected Bluetooth device are played through the speaker now. Use
„
the volume control of the appliance as described above (
All playback functions can be managed through the Bluetooth device's controls.
„
Alternatively, you can partly control the playback through the controls of your appliance
„
( 6./7. CD/USB operation).
Notes:
Bluetooth works best within a range of up to 8 to 10 metres.
„
The speaker can be connected only to one Bluetooth device at a time.
„
The music streaming may be interrupted by obstacles between the device and speaker,
„
such as walls, metallic casing that covers the device, or other devices nearby that
operate in the same frequency.
If the connected device goes out of Bluetooth range, the appliance will reconnect
„
automatically when the device comes back into range.
When switched back to Bluetooth mode, the appliance automatically starts reconnecting
„
with last paired device, if available.
9.

CoNNECTING EXTERNaL aPPLIaNCEs

External appliances, e.g. MP3 players or similar, can be connected via the 3.5 mm
„
LINE IN socket (8).
Note: A suitable connection cord is needed (not included).
„
Connect the external appliance to the LINE IN socket (8).
„
Press LINE IN (40) on the remote control or press repeatedly
„
The display (3) shows
When an external appliance is connected, all playback functions will be managed
„
through the external appliance's controls.
The volume can still be controlled through this appliance's volume controls
( 4. Basic functions), however all the other operation controls will stop functioning as
long as the external appliance is connected.
Should the volume still be too low, adjust the volume of the external appliance.
„
.
37
(9) on the main unit to
.
4. Basic functions).
(9) on the main unit.
EN
.