Before First Use; Unpacking; Connecting Antenna; Connecting Speakers - Telefunken MC1001BM Instruction Manual

3.

bEFoRE FIRsT UsE

3.1

Unpacking

EN
Remove all packaging.
„
Check for the presence of all parts and for transport damage. In case of damage or
„
incomplete delivery, please contact your dealer (
Please keep the packaging. The appliance can be stored in it if it is not used for a longer
„
period of time.
Place the appliance on a level, stable, clean and dry surface.
„
Ensure that there is sufficient ventilation. Keep a minimum distance of 10 cm between
„
the product and other objects or walls.
3.2

Connecting antenna

Unroll the supplied FM antenna (20)
„
and connect it to the FM antenna
socket (18) at the back of the main
unit.
3.3

Connecting speakers

Connect the 2 speakers (15) to the speaker output SPEAKER OUT (6 Ω)
„
(L & R / + & -) (17) at the back of the main unit.
Press down the socket flaps to open the sockets and keep the flaps pressed.
„
Insert the stripped part of the speaker cable (16) completely into the foreseen openings.
„
Insert the right speaker wires to "R" and the left speaker wires to "L".
„
Release the socket flaps and make sure that the wires are properly connected and
„
cannot slip.
Note: During the connection of the speakers, polarity (+) with white speaker wire while
„
polarity (-) with black speaker wire.
3.4

Power supply

Connect the power plug (19) to a suitable electrical outlet. Make sure that the power
„
supply voltage is the same as needed for the appliance. The appliance is ready for
operation.
Note: The appliance draws a small amount of power even if it is not turned on. If you
„
do not use the appliance for a longer period of time, disconnect the power plug (19) to
completely switch off the appliance.
13. Warranty).
28