Radio Operation; Fm Antenna; Selecting Mono/Stereo; Selecting And Saving Stations Manually - Telefunken MC1001BM Instruction Manual

5.

RaDIo oPERaTIoN

5.1

FM antenna

The appliance is equipped with a FM antenna (20) that has to be connected at the back
„
of the main unit (
Unroll the antenna to achieve the best reception.
„
5.2

selecting mono/stereo

Press FM (30) key on the remote control or press repeatedly
„
choose radio mode.
is shown.
Stereo mode is available for FM radio stations.
„
When already in tuner mode, press repeatedly sT/MoNo (33) key to select stereo
„
or mono reception. The orange indicator ST
The indicator stays on the display (3) only when a radio station with a strong signal is
received.
Note: The red stereo indicator ST
„
signals.
The mono mode is advised to use for radio stations with weaker signal.
„
5.3

selecting and saving stations manually

Press FM (30) key on the remote control or press repeatedly
„
choose radio mode.
is shown.
Press
„
control repeatedly to manually search for radio stations (in 0.05 MHz increments).
Press and hold above mentioned keys to automatically search for radio stations.
„
To save a received radio station press PRoG / MEMoRY (47) on the remote control. The
„
indicator MEMORY appears and
disappear after 5 seconds of inactivity."
Press
„
PRoG / MEMoRY (47) again to confirm.
Repeat above operations to save more stations into the appliance memory. Up to 30 FM
„
radio stations can be saved.
Press
„
to select one of the stations saved to the appliance memory.
5.4

selecting and saving stations automatically

Press and hold aMs/sToP (32) key or
„
scan all available radio frequencies in your area and save them in the memory. Up to 30
FM radio stations can be saved.
When the search is finished, the appliance automatically tunes to the first programmed
„
FM-station (P01).
Press
„
to select one of the stations saved to the appliance memory.
3.2 Connecting antenna).
appears briefly on the display (3). After, the current frequency
appears briefly on the display (3). After, the current frequency
(13) keys on the main unit or TUN+ (29) / TUN- (43) on the remote
(12) /
/ /
(27) or (44) on the remote control to select the desired slot. Press
/ /
(27) or (44) keys on the remote control or use the numeric keys (23)
/ /
(27) or (44) keys on the remote control or use the numeric keys (23)
appears briefly on the display (3).
does not light up for radio stations with weak
blinks on the display (3). "MEMoRY" and "P01" will
(5) on the main unit for about 3 seconds to
31
(9) on the main unit to
(9) on the main unit to
EN