Basic Functions; Switching The Appliance On And Off; Setting Volume; Setting Equalizer - Telefunken MC1001BM Instruction Manual

4.

basIC FUNCTIoNs

4.1

switching the appliance on and off

EN
Connect the power plug (19) to a suitable electrical outlet. The standby indicator (2)
„
lights up red.
Press
„
switch the appliance on. The display (3) briefly shows
Press
„
to switch the appliance to standby mode. The display (3) briefly shows
that appliance is powered as long as it is connected to the electrical outlet.
To completely switch off the appliance, disconnect the power plug (19) from the
„
electrical outlet. Do this if you do not use the appliance for a longer period of time.
4.2

setting volume

Set the volume with the volume knob VoLUME +/- (10) or VoL +
„
keys on the remote control. Press and hold on the remote control for fast adjustment.
The display (3) shows
„
from 01 to 29. When reaching the end of the volume range, the display (3) shows
or
Press MUTE (34) key to mute the sound.
„
Press MUTE (34) key again to resume the sound. You can also use volume knob
„
VoLUME +/- (10) or VoL +
the sound.
Note: The selected volume setting (e.g. 27) will be saved in the memory even after the
„
appliance is set to standby mode or completely disconnected from the power source.
4.3

setting equalizer

Press EQ (7 or 37) key on the main unit or remote control to choose a preset equalizer
„
mode. Available settings are:
The selected equalizer mode appears briefly on the display (3), e.g.
„
The selected equalizer mode is saved in the memory even after the appliance is set to
„
standby mode or completely disconnected from the power source.
4.4

Automatic shut down (sleep)

When the appliance is in active mode, you can switch off the appliance automatically
„
after a preset time (between 10 and 90 minutes, in 10 minute intervals).
When the sleep timer is set, the SLEEP indicator is shown on the display (3).
„
Press sLEEP (39) key to activate the sleep mode. The display (3) shows
„
the SLEEP indicator lights up.
Press sLEEP (39) key repeatedly to set the desired shut down time in 10-minute
„
intervals.
To cancel the sleep function, press sLEEP (39) key repeatedly until the display (3) shows
„
The settings are saved automatically after 5 seconds of inactivity.
„
The check the current settings of the timer, press sLEEP (39). The current time until the
„
appliance will switch off automatically is shown on the display (3), e.g.
( 1) key on the main unit or
( 1) key on the main unit or
with a current set volume, e.g.
.
(26) / VoL -
ROCK/ CLASSIC/ JAZZ / POP / FLAT
. The SLEEP indicator goes off.
/ sTaNDbY (48) key on the remote control to
/ sTaNDbY (48) key on the remote control again
blinks on the display (3).
(28) keys on the remote control to resume
30
.
. Note
(26) / VoL -
. The volume settings range
.
.
(28)
and