Remote Control - Inserting Batteries; Remote Control - Using Tips - Telefunken MC1001BM Instruction Manual

3. bEFoRE FIRsT UsE
3.5 Remote control – inserting batteries
For operation of the remote control,
„
2 x 1.5 V
is needed (not supplied).
Lift up and remove the battery compartment
„
cover.
Insert the batteries according to the polarity
„
markings inside the battery compartment (36)
and on the batteries.
Close the battery compartment cover and
„
make sure it snaps into place.
If the remote control does not work properly,
„
replace the battery.
Use batteries of high quality only. Batteries of
„
low quality might leak and cause damage.
Note: Remove the battery, if the remote
„
control is not to be used for a longer period
of time, as it might be damaged by leaking
batteries.
3.6 Remote control – using tips
Aim the remote control directly at the
„
appliance. The distance should be less
than 7 metres and within 30°. Make
sure there are no obstacles between the
remote control and unit.
The remote control may be less effective
„
if:
there are obstacles between the
remote control and the appliance.
other remote controls are operated
at the same time.
the battery is low.
battery (type AAA/LR03/R03)
29
EN