Testing The Remote Supervisor Adapter - IBM totalstorage 326 User Reference

Network attached storage 300
Hide thumbs Also See for totalstorage 326:
Table of Contents

Advertisement

5. When you finish viewing this information, press Esc to return to the main option

Testing the Remote Supervisor Adapter

1. Insert the Remote Supervisor Adapter Support CD into the CD-ROM drive and
2. After the engine boots, the main menu appears, containing the following
3. Use the up and down arrow keys to select Hardware Status and Information
4. Use the up and down arrow keys to select the device to view in more detail.
110
Model 326 User's Reference
NVRAM Memory Test
Realtime Clock Test
Programmable Gate Array Test:
I2C Interface Test:
Main Application Checksum:
Boot Sector Checksum:
Current BIST Results:
SRAM Memory Test:
Serial Port 1 Test :
Serial Port 2 Test:
NVRAM Memory Test
Realtime Clock Test
Programmable Gate Array Test:
I2C Interface Test:
Main Application Checksum:
Boot Sector Checksum:
Onboard Ethernet Hardware Test:
PCI EEPROM Initialization Test:
menu. Remove the CD, then restart the Model 326 engine.
restart the engine. If the engine does not boot from the CD-ROM, use
POST/BIOS setup to configure the CD-ROM drive as a boot device.
selections:
v Hardware Status and Information
v Configuration Settings
v Update System Management firmware
and press Enter. The Hardware Status and Information menu contains the list
of devices with the following diagnostic test results:
System Management Processor Communication
->
Built in Self Test Status ......
Boot Sector Code Revision ...
Main Application Code Revision
Press Enter. You will see a list of tests and results on the device:
Current System Management Processor Status
Current BIST Results:
SRAM Memory Test:
Serial Port 1 Test :
Serial Port 2 Test:
NVRAM Memory Test
Realtime Clock Test
Programmable Gate Array Test:
I2C Interface Test:
Main Application Checksum:
Boot Sector Checksum:
Current BIST Results:
SRAM Memory Test:
Serial Port 1 Test :
Serial Port 2 Test:
Current System Management Adapter Status
: Passed
:16, Build ID: CNET15A
:16, Build ID: TUET15A
Current System Management Adapter Status
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
: Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed

Advertisement

Table of Contents
loading

Table of Contents