Toshiba rd-xv48dtkb Service Manual page 24

How to Verify the Firmware Version
1. Turn the power on and remove the disc in the tray.
2. To switch the HDD & DVD into HDD mode, press
[HDD] on the remote control unit.
3. To put the HDD & DVD into version display mode,
press [VARIABLE SKIP] and [1], [2], [3] buttons on
the remote control unit in that order within 3
seconds. Fig. i appears on the TV screen.
*1: " ******* " differs depending on the models.
*2: Firmware Version differs depending on the
models, and this indication is one example.
F/W VERSION DISP
MODEL NAME :
DVB-T VERSION :
FE VERSION :
BE VERSION :
TT VERSION :
DV UNIQUE ID :
LD ADJUSTMENT :
DISC ADJUSTMENT :
DEFAULT SETTING : ENTER
EXIT : RETURN
Fig. i: Firmware version display
Display
MODEL NAME Model Name
DVB-T
DVB-T Module version
VERSION
FE VERSION Firmware F/E version
BE VERSION Firmware B/E version
TT VERSION Firmware T/T version
DV UNIQUE ID DV Unique ID
LD LD adjustment progress (done: OK/
ADJUSTMENT not done: --)
DISC Factory adjustment progress (done:
ADJUSTMENT OK/not done: --)
4. Press [RETURN] or [
Note: Be sure to verify the firmware version.
*******
*.**
***_***_***
************
*********
******** ********
OK
OK
Contents
] button to turn off.
1-10-2 E3NG1FW