Table of Contents
Advertisement
i
The electronic clock and timer display will flash when the appliance is first connected to
power or if power is interrupted. The display will stop flashing once the time-of-day clock
has been set.
TO SET THE TIMER
1. Press the CLOCK pad.
1. Press the TIMER pad. 0:59, or one hour, will appear in
the display.
2. Press and hold the HOUR pad to set the correct hours.
The timer will automatically begin counting down in
Tap the pad once to change the time by a single hour.
increments of one minute.
3. Press and hold the MINUTE pad to set the correct
2. To set the timer for less than one hour: Press the
minutes. Tap the pad once to change the time by a
TIMER pad then press and hold the MINUTE pad until
single minute,
the desired time appears in the display. To change the
time by a single minute, tap the pad once.
For example: To set the clock for 3:15, press and hold the
HOUR pad until 3 appears in the hours display. Then
3. To set the timer for more than one hour: Press the
press and hold the MINUTE pad until 15 appears in the
TIMER pad then -
minutes display.
° Press the HOUR pad, 1:59, or two hours, will appear
in the display.
• Press the MINUTE pad until the desired minutes
appear in the display.
NOTE: Two hours is the maximum time that can be
set.
4. When the time has elapsed, 0:00 will appear in the
display and continuous beeps will sound to indicate the
end of the timing operation,
5. Press the CLOCK pad to cancel the beeps. The current
time of day will reappear in the display.
To cancel the timer: Press the CLOCK pad and the
display will return to the current time of day.
Advertisement
Table of Contents
