Table of Contents
Advertisement
FEATURES
ELECTRONIC
TIME-OF-DAY CLOCK
AND TIMER
If your range is equipped with a digital
clock and timer, it will either be design
1 or design 2. Follow the instructions
for the illustration that matches the
clock on your range.
DESIGN 1
DESIGN 2
When range is first connectedto power
TO SET A TIMING OPERATION FOR
or if power is interrupted,12:00 will
LESS THAN ONE HOUR: Press and
flash in the display,
hold MIN buttonuntildesired time ap-
pears in the display. Timerwill immedi-
Q
Q
CLOCK SET
MINUTE TIMER
TO SET CLOCK: Slide switch up to
ately begin counting down as soon as
CLOCK position,
the MIN button is released.
HOUR
CLOCK
0[
1 2
] _
_
TO SET A TIMING OPERATION FOR
88:88will flash in the display when
I'D _"_
ONE TO TWO HOURS: Press the
range is first connected to power or if
: QJ _j
HOUR button. (1:59 will appear in the
power is interrupted.
display.) Select desired minutes by
MZN
TIMER
pressing and holding MIN button. Tim-
ing willbeginwhen buttonis released.
TO SET CLOCK: Press and hold
Pressand holdHOUR buttonuntilcot-
Twohours is the maximum timing that
CLOCK SET buttonwhileturningMIN-
rect hourappears in the display,
can be set.
UTE TIMER knob to the correcttime-
of_day. MINUTE TIMER knob can be
turnedin either direction.
Press and hold MIN button until the
TO CANGEE M|NUTE _MER QP
correct minutesappear in the display.
ER_ATII_N _R
TO SET MINUTE TIMER: Turn MIN-
_i_E _bs _
_i_f-d_
i _#
UTETIMER knobtothe right,tothe de-
sired time, up to 60:90 (1 hour).Timer
TO SET MINUTE TIMER: Slideswitch _
i6 _
_ _ ay
will begin counting down after a few
down to TIMER position. The timer will
automatically begin counting down
seconds delay. When time has lapsed,
from 1 hour in increments of one min-
a continual beep will sound for up to 2
ute.
minutes.
HOUR
CLOCK
_
_
Press CLOCK SET button to stop beep
[
_=
sounds. The correct time-of_;iay will
O
_ 5
reappear in the display.
MIN
TIMER
(0:59)will be displayed as soon as the
switch is moved to the TIMER posi-
tion.)
To check time-of-day during a timing
operation,press and hold CLOCK SET
button. Time will reappear in the dis-
play.
-4-
Advertisement
Table of Contents
