Table of Contents
Advertisement
FEATURES
DIGITAL CLOCK AND
TIMER
If your rangeis equippedwith a digital
clockand timer,itwilleitherbe design
1 or design2. Followthe instructions
for the illustrationthat matches the
clockon yourrange.
DESIGN1
DESIGN2
Whenrangeisfirstconnected topower
TO SET A TIMING OPERATION FOR
or if power is interrupted,12:00 will
LESS THAN ONE HOUR: Pressand
flash in the display,
hold MIN button until desired time ap-
Q
Q
pears in the display. Timer will immedi-
TO SET CLOCK: Slide switch up to
ately begin counting down as soon as
CLOCK
SET
MINUTE
TIMER
CLOCK position,
the MIN button is released.
I_
I
12
00]_1_
TO SET A TIMING OPERATION FOR
88:88 will flash in the display when
•
ONE TO TWO HOURS: Press the
range is first connected to power or if
•
HOUR button. (1:59 will appear in the
power is interrupted.
display.) Select desired minutes by
pressing and holding MIN button. Tim-
ing will begin when button is released.
TO SET CLOCK: Press and hold
Press and hold HOUR button until cor-
Two hours is the maximum timing that
CLOCK SET button while turning MIN-
rect hour appears in the display,
can be set.
UTE TIMER knob to the correct time-
of-day. MINUTE TIMER knob can be
turned in either direction.
Press and hold MIN button until the
TO CANCEE M!NUTE TIMER OP-
correctminutesappear in the display.
ER_N
_R ST_P
i EN_F-
;'_
_iaEii _E_i
Sideswitch
_io!he'""
TO SET MINUTE TIMER: Turn MIN-
UTETIMER knob to the right,to the de-
TO SET MINUTE TIMER: Slide switch
_
aY_il! _ea_
sired time, up to 60:00 (1 hour). Timer
down to TIMER position. The timer will
will begin counting down after a few
automatically begin counting down
secondsdelay. When time has lapsed,
from 1 hour in increments of one min-
a continual beep will sound for up to 2
ute.
minutes.
_[
g
5
__________
_
i_
Press CLOCK SET button to stop beep
sounds. The correct time-of-day will
•
reappear in the display.
TO CANCEL A TIMING OPERA-
TION: Turn MINUTE TIMER knob to
(0:59)will be displayed as soon as the
the left, until 00:00 appears in the dis-
switch is moved to the TIMER posi-
play. The correct time-of-day will re-
tion.)
appear in the display after a few sec-
onds delay.
To check time-of-day during a timing
operation, press and hold CLOCK SET
button. Time will reappear in the dis-
play.
_4-
Advertisement
Table of Contents
