Printing Using The Dpof Settings; Disconnecting The Cable From The Printer - Pentax Optio WP Operating Manual

Printing Using the DPOF Settings

1
In the printing mode selection screen, use the four-way
controller (23) to select [DPOF setting].
2
Press the 4 button.
The DPOF settings you have made appear.
Use the four-way controller (45) to check
the settings for each image. Refer to p.136
for instructions on how to make the DPOF
settings.
3
Press the 4 button.
A confirmation dialog appears.
4
Press the 4 button.
The images are printed according to the settings.
Press the 3 button to cancel printing.

Disconnecting the Cable from the Printer

Disconnect the USB cable from the camera and printer when you have
finished printing.
1
Turn off the camera.
2
Disconnect the USB cable from the camera and printer.
100 - 0017 100 - 0017
100
Print with DPOF setting Print with DPOF setting
Copies 0 1 Date
Total
1 0
Cancel Cancel Cancel
MENU OK
0017
Print Print
6
143