Setting The Sensitivity - Pentax Optio WP Operating Manual

R A C F q < I B i \ C E x X y > z D J

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.
The default setting is Auto.
4
Sensitivity
Auto The camera sets the sensitivity automatically.
50 • The lower the sensitivity, the less noise that affects the image. The
100
• Higher sensitivity settings use faster shutter speeds in low light
200
400
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the sensitivity.
5
Press the shutter release button
halfway.
The Sensitivity setting is saved and the camera returns to capture
status.
If you use the [Sensitivity] function frequently, you can save time by
assigning it to the Green button. (1p.58)
Saving the Sensitivity 1p.97
92
shutter speed will be slower in low light conditions.
conditions to reduce camera shake, but the image may be affected by
noise.
5
MENU
2, 3, 4
1
Rec. Mode 1/3
5
Recorded Pixels
M
Quality Level
AWB White Balance
AF AF Setting
ISO
Sensitivity
AUTO
Exit Exit Exit
MENU
Rec. Mode 1/3
5 Recorded Pixels
M
Quality Level
AWB White Balance
AF AF Setting
ISO
Sensitivity
AUTO
Cancel Cancel Cancel
MENU
Auto
50
100
200
400
OK OK OK
OK