Read In A File; Error/Transmission Log - Siemens SINUMERIK 840DE Operation & Programming Manual

8
Parts Program Management

8.8 Read in a file

8.8

Read in a file

Precondition
Read-in
RS-232-C
Start
Stop
Start
8.9

Error/transmission log

Select error log
Error
log
8-154
Sequence of operations
You have selected the interface for your data device correctly.
Select the soft key labeled "Read-in RS-232-C".
The "Read-in RS-232-C" window is opened.
Start the transfer from the other side (on the data device).
When you select the soft key "Start", the data are copied in the path
you have specified.
The names of the imported files and the number of bytes transmitted
are displayed.
You can interrupt the data import operation by selecting the "Stop" soft
key.
Press the soft key labeled "Start" again to restart import of the files,
and start the operation again at the opposite end (on the data device).
Selecting the "Back" soft key returns you to the higher-level directory
overview. The "Read-in RS-232-C" function remains active if a
RS-232-C transmission has already been started.
NC start is not possible while the files are being imported.
Function
When you press the soft key "Error log" a log confirming successful
file transfer is output.
• For files to be exported
− the file name including path name and
− a status acknowledgment.
• For files to be imported
− the file name and the first line, which generally contains the
path, as well as
− a status acknowledgment.
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
8
08.02
n