6
Turning any Contours (Free Contour Input)
6.7 Stock removal against contour
6.7
Stock removal against contour
Remove
stock
Longitudinal direction
Facing direction
Parallel to contour
6-122
Function
With the function "Stock removal", contours can be machined in
longitudinal/facing direction. Stock removal can be performed for any
blank. You can select one of three technologies, i.e. roughing, finishing
and complete machining.
This function is a software option.
In the basic soft key menu of CONTOUR mode, confirm the soft key
labeled "Remove Stock".
Explanation
External
parallel to
Z axis
Face end
parallel to
X axis
External
parallel to
contour
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
6
08.02
Internal
Back plane
Internal