Reporting The Problem - IBM pseries 630 6C4 Installation Manual

Component
PCI Adapters
Memory DIMMs
CEC Backplane
Processor Board
PCI Riser Card
Disk Drive
Backplane
Component
SCSI Port
RIO Port
Ethernet Port
Ethernet0,
Ethernet1

Reporting the Problem

After you have determined which component is failing, report the problem as follows:
1. Record the following information before call for service:
v Machine type and model number
v Server serial number
v Any error codes that appear in the operator panel display or console
v The adapter or device containing the lit amber-colored LED
2. Call for service. You will be given the choice to replace the failing component
yourself or have a service representative replace it for you. If you decide to replace
the failing component, go to "Repair Action" on page 144 for instructions.
LED Location
Function
Electronics Component LEDs
PCI Riser Card
Power
(board socket)
PCI Riser Card
Attention
(board socket)
Identify Processor
Board (Top)
Identify CEC Backplane Amber (1x)
Identify Processor
Board (Top)
Identify PCI Riser Card
LED Location
Function
Port LED Indicators
Activity Operator Panel
Identify CEC Backplane
CEC Backplane
Mode
Activity CEC Backplane
Activity Operator Panel
LED Color OFF
Green (4x) PCI Hot-Plug Standard
Amber (4x) PCI Hot-Plug Standard
Amber (8x) Normal
Normal
Amber (1x) Normal
Amber (1x) Normal
No LED
LED Color OFF
Green (1x) No Activity
Normal
Amber (2x)
If blinking = Identify
Green(2x) 10Mbit Mode 100Mbit
Green (2x) No Activity
Green (1x) No Activity
Appendix D. Fault and Attention LEDs
ON
Fault
Fault
Fault
Fault
ON
Activity
Fault
Mode
Activity
Activity
143