Appendix D. Fault And Attention Leds; Operator Panel Display - IBM pseries 630 6C4 Installation Manual

Appendix D. Fault and Attention LEDs

This appendix contains information about fault and attention LEDs, which assist in
identifying failing components in your system.

Operator Panel Display

If a failing component is detected in your server, an amber-colored attention LED is lit.
Number
1 Power-On Button
2 Power LED
3 Attention LED
4 SCSI Port Activity
5 Ethernet Port Activity
Component Name
1 Power-On Button
2 Power LED
3 Attention LED
4 SCSI Port Activity
5 Ethernet Port Activity
6 Operator Panel Display
7 Front Serial Connector
(FS1)
8 CSP Reset Button
9 System Reset Button
6 Operator Panel Display
7 (FS1) Front Serial
Connector (RJ48 Connector)
8 CSP Reset Button (Pinhole)
9 System Reset Button
Component Description
Turns the system power on and off.
Normal State - LED is on when system is
connected to a power source.
Normal State - LED is off.
Normal State - LED is on when there is SCSI
activity.
Normal State - LED is on when there is Ethernet
activity.
Displays current status of system startup, or
diagnostic information in the event of a hardware
problem.
Serial port uses RJ48 connector. Use to plug in
external devices at the front of the system unit.
Service Personnel Use
Resets the system
141