1-3. Adjustable components (seats, mirrors, steering wheel)
Driving position memory system
Your preferred driving position (the position of the driver's seat, steering
wheel and outside rear view mirrors) can be entered into the computer's
memory and recalled with the touch of a button. It is also possible to set this
function to activate automatically when the doors are unlocked.
Three different driving positions can be entered into memory.
The same buttons are found on the front passenger's side, allowing the
position of the front passenger's seat to be memorized. (if equipped)
■
Entering a position to memory
Turn the "ENGINE START STOP" switch to IGNITION ON
STEP
1
mode.
Adjust the driver' s seat, steering wheel, and outside rear view
STEP
2
mirrors to the desired positions.
STEP
STEP
3
3
GS_G_U (OM30C11U)
May 21, 2010 1:06 pm
While pushing the "SET" button,
or within 3 seconds after the
"SET" button is pushed, push
button "1", "2" or "3" until the
signal beeps.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
1
55