Siemens Simatic ET 200SP Manual page 41

Analog output module aq 2xu/i hs

Hide thumbs Also See for Simatic ET 200SP:

Table of Contents

Channel parameter block

The figure below shows the structure of the channel parameter block.

Enable a parameter by setting the corresponding bit to "1".

Figure A-6

Codes for output types

The table below contains the codes for the output types of the analog output module. You

must enter these codes in bytes x of the channel parameter block of data record 128 (see

previous figure).

Table A- 1

Output type

Deactivated

Voltage

Current

Analog output module AQ 2xU/I HS (6ES7135-6HB00-0DA1)

Manual, 09/2016, A5E03576140-AD

A.2 Parameter assignment and structure of the parameter data record

Structure of byte x to x+5 for channels 0 and 1

Codes for output types

Parameter data record

Code

0000 0000

0000 0001

0000 0011

Table of Contents