Siemens Simatic ET 200SP Manual page 32

Technical specifications
6.1 Technical specifications
Analog outputs
Number of analog outputs
Voltage output, short-circuit protection
Voltage output, short-circuit current, max.
Cycle time (all channels), min.
Analog output with oversampling
•
•
Output ranges, voltage
0 to 10 V
1 V to 5 V
-5 V to +5 V
-10 V to +10 V
Output ranges, current
0 to 20 mA
-20 mA to +20 mA
4 mA to 20 mA
Wiring the actuators
for voltage output two-wire connection
for voltage output four-wire connection
for current output two-wire connection
Load resistance (in rated range of the output)
For voltage outputs, min.
For voltage outputs, capacitive load, max.
For current outputs, max.
For current outputs, inductive load, max.
Destruction limit for externally applied voltages
and currents
Voltages at the outputs
Cable length
Shielded, max.
Formation of analog values for the outputs
Settling time
For resistive load
For capacitive load
For inductive load
32
Values per cycle, max.
Resolution, min.
6ES7135-6HB00-0DA1
2
Yes
45 mA
125 µs
Yes
16
45 µs; (2 channels), 35 µs (1 channel)
Yes; 15 bit
Yes; 13 bit
Yes; 15 bit incl. sign
Yes; 16 bit incl. sign
Yes; 15 bit
Yes; 16 bit incl. sign
Yes; 14 bit
Yes
Yes
Yes
2 kΩ
1 µF
500 Ω
1 mH
30 V
1000 m; 200 m for voltage output
0.05 ms
0.05 ms; max. 47 nF and 20 m cable length
0.05 ms
Analog output module AQ 2xU/I HS (6ES7135-6HB00-0DA1)
Manual, 09/2016, A5E03576140-AD