Heath And Safety Incident Reporting - Xerox WorkCentre Pro 412 Service Manual

Laser Safety
Invisible laser radiation. avoid exposure to beam.
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
This product contains laser warning labels. These labels are intended for use by Service and Mainte-
nance Representatives and are placed on the top surface of the Laser Unit. Do not attempt to open the
laser unit. There are no serviceable components or areas inside the unit. Operation of the laser unit
with machine or laser covers removed could cause eye damage if the laser beam is viewed directly.
Electrostatic Damage Caution
The following is an example of the terminology and symbols used in this manual for an electrostatic damage
caution:
Certain components in this product are susceptible to damage from electrostatic discharge. Observe all ESD
procedures to avoid component damage.

1-4 Heath and Safety Incident Reporting

I. Summary
This standard defines requirements for notification of health and safety incidents involving Xerox products
(equipment and materials) at customer locations.
II. Scope
Xerox Corporation and subsidiaries worldwide.
WorkCentre Pro 412
Launch Issue
WARNING
Caution
August 2001
Introduction
1-4