Xerox WorkCentre Pro 412 Service Manual page 68

Disassembly and Reassembly
11. Remove the three screws and take out the
glass from the cover scan upper assembly.
12. Remove the five screws and dummy scanner
lower.
13. Remove the CCD cable.
6-4
14. Pull up the shaft CCD and take out the scanner
15. Remove three screws and take out the motor
Dummy Scan Lower
16. Remove two screws and take out the platen
August 2001
module.
Pully
Scanner Module
bracket.
PBA.
Platen PBA
Shaft CCD
Belt
WorkCentre Pro 412
Launch Issue