Table of Contents
Advertisement
3|
Creating VLANs on the Thomson Gateway
Listing all VLANs
To list all VLANs that were created in the previous example, execute following command:
=>:eth vlan list
Vid
Name
---
----
1
default
2
data
3
video
4
voice
The number of active VLANs is the number of VLANs that are in use at a certain moment. The
maximum number of active VLANs that the bridge can support at any time is 15, including the
VLANs that are already created by default.
Deleting a VLAN
To delete a specific VLAN, use the command
One parameter must be specified:
Name: the name of the VLAN to be deleted.
For example, to delete the voice VLAN, execute following command:
=>:eth vlan delete name=voice
=>:eth vlan list
Vid
Name
---
----
1
default
2
data
3
video
You cannot delete the
Even if one or more bridge ports are member of the deleted VLAN, the VLAN is deleted without
warning. Each affected bridge port becomes untagged member of the default VLAN.
Flushing all VLANs
To delete all VLANs at once, execute following command:
=>:eth vlan flush
=>:eth vlan list
Vid
Name
---
----
1
default
You cannot flush the
Even if one or more bridge ports are member of the flushed VLANs, the VLANs are deleted without
warning. All bridge ports become untagged members of the default VLAN.
10
:eth vlan delete
default VLAN
(VID=1).
default VLAN
(VID=1).
.
E-DOC-CTC-20080229-0001 v1.0
Advertisement
Table of Contents
