Siemens Hicom 150 E User And Installation Manual page 43

Switching State
If you want to transfer a call to a station in the busy lamp field, you
have two options:
z
Normal transfer
With the left mouse button, click the status button for the station
to which you want to transfer the call.
You can notify the station of the call.
Connect the station by clicking the Connect button (the Clear but-
ton is replaced by the Connect button) or press the + key on the
or
keyboard.
+
z
Speed transfer
With the right mouse button, click the status button for the station
to which you want to transfer the call.
The call is immediately forwarded to the selected station. If this sta-
tion is busy, the busy station is automatically camped on after ap-
proximately five seconds (can be configured by the system admin-
istrator). If the station cannot be reached, the call is signaled in the
call display as a recall after approximately forty seconds (can be con-
figured by the system administrator).
Double-clicking a status button has the same effect as
single-clicking it.
Dialing
43