Releasing An External Trunk - Siemens Hicom 150 E User And Installation Manual

Releasing an External Trunk

You want to place an urgent external call and receive a busy signal
because no external trunk is available. You can select a busy trunk
and disconnect the call on this trunk to make the trunk available for
your call.
Releasing a Busy Trunk
You wish to dial an external station number but already hear a busy
signal before you dial.
Click the release trunk icon in the toolbar.
The call display is replaced by the dialog box for releasing a trunk.
Using the ,
an external trunk from a menu.
Click the Back button in the box for releasing a trunk to return to the
call display.
Now enter the station number and press Enter to confirm your en-
try. The station is dialed via the released trunk.
If your system is not configured for releasing an external
trunk, the release trunk button will not appear in the toolbar.
Reaching Parties More Effectively
and buttons, you can select and release
63