Advertisement
APRaAIRE
COMMUNICATING THERMOSTAT SYSTEM INSTALLADON
MANUAL
L.
SETUP COMPUTER FOR COMMUNICATION
SYSTEM CHECKOUT (SEE ILLUSTRATIONS 8 -14)
1. Turn on the main communication switches on the Communication Panel (see Dlustration 8).
--
--
485 seRI.A.L N
ON ON
POWER
ORB..BKRD
~ ~
24VAC
~~~~~
OFFA,OFF
8, "I
~
J.-
TURN ON MAIN
COMMUNICATION SWITCHES
IN
COMMUNICATION
PANEL
ll.LUSTRAnON
8
2.
Connect the Protocol Adapter RS232 output to a computer with Windows '95, '98 or Windows NT. This
may already have been done in step 0-3.
3. Turn on the computer.
4. From the Start menu, select PROGRAMS~ ACCESSORIES~ COMMUNICAnONS=>
BYPERTERMINAL (see Illustration 9). Hyperterminal is a teIII1ina1 emulator program provided with
Windows that we will use to test the communication system.
+:. If you now have the HYPERTE~AL
folder available, skip the next step and go to Step 6.
If the COMMUNlCA TIONS or HYPERTE~AL
folder is not present, you will need to add this
program to your Windows setup. From the Start menu, select SETTINGS => CONTROL PANEL, then
select (double click) the Add/Remove Programs icon. Select the Windows Setup tab, and place a J in
s.
16
Advertisement
