Dodge RAM 1500 1998 Owner's Manual page 96

DR
SINGLE CARDAN UNIVERSAL JOINTS (Continued)
(8) Install flange (1) with U-joint in yoke (2) (Fig.
34).
Fig. 35 PRESS ON YOKE
1 - RECEIVER
2 - PRESS
3 - BEARING
(9) Position press (2) with receiver (1) and lower
bearing cap (3) on yoke (Fig. 35).
(10) Press bearing cap until snap ring groove is
through the yoke.
Fig. 36 SNAP RING
1 - BEARING
2 - SNAP RING
(11) Install snap ring (2) on bearing cap (1) (Fig.
36).
Fig. 37 REMAINING BEARING
1 - BEARING
2 - PRESS
3 - RECEIVER
(12) Position press (2) with receiver (3) on remain-
ing bearing cap (1) and yoke (Fig. 37).
(13) Press remaining bearing cap until snap ring
groove is through the yoke.
Fig. 38 SNAP RING
1 - BEARING
2 - SNAP RING
(14) Install snap ring (2) on bearing cap (1) (Fig.
38).
PROPELLER SHAFT 3 - 15