Dodge RAM 1500 1998 Owner's Manual page 183

3 - 102 REAR AXLE - 9 1/4
DIFFERENTIAL-TRAC-LOK (Continued)
(4) Lubricate and install disc, that is not threaded
from Trac-Lok Tool Kit 8139 into the lower side gear
(Fig. 43).
Fig. 43 ADAPTER DISC
1 - LOWER SIDE GEAR
2 - DIFFERENTIAL CASE
3 - DISC
(5) Install threaded disc from Trac-Lok
8139 into top side gear. Thread forcing screw from
Trac-Lok Tool Kit C-4487 through top disc until it
comes in contact with lower disc.
(6) Position a small screw driver in slot of top disc
(Fig. 44) to prevent disc from turning.
(7) Tighten forcing screw to 122 N·m (90 ft. lbs.)
maximum to compress Belleville springs in clutch
packs (Fig. 45).
(8) With a feeler gauge remove thrust washers
from behind the pinion gears (Fig. 46).
(9) Insert turning bar from tool kit into pinion
mate shaft hole in the case (Fig. 47).
1 - SOCKET
2 - SLOT IN DISC
3 - SCREWDRIVER
4 - DISC
5 - FORCING SCREW
6 - THREADED DISC
Tool Kit
Fig. 45 COMPRESS BELLEVILLE SPRING
1 - TORQUE WRENCH
2 - FORCING SCREW
3 - DIFFERENTIAL CASE
Fig. 44 THREAD ADAPTER DISC
DR