Dodge RAM 1500 1998 Owner's Manual page 95

3 - 14 PROPELLER SHAFT
SINGLE CARDAN UNIVERSAL JOINTS (Continued)
(3) Press bearing cap until snap ring groove (1) is
through the flange (2) (Fig. 30).
Fig. 31 SNAP RING
1 - BEARING
2 - SNAP RING
(4) Install snap ring (2) on bearing (1) (Fig. 31).
Fig. 32 REMAINING BEARING
1 - BEARING
2 - RECEIVER
3 - PRESS
(5) Position press (3) with receiver (2) on remain-
ing bearing cap (1) and flange (Fig. 32).
(6) Press bearing cap until snap ring groove is
through the flange.
Fig. 33 SNAP RING
1 - SNAP RING
2 - BEARING
(7) Install snap ring (1) on bearing cap (2) (Fig.
33).
Fig. 34 FLANGE WITH U-JOINT
1 - FLANGE
2 - YOKE
DR