Advertisement
3.6 Cooling system (liquid-cooled engine)
8.5 Ensure the hose is pushed up to the index mark on the
8.6 Clips must be in good condition to secure the hoses firmly
hose union
4 Check the condition of the hose clips; if
they are corroded or have lost their tension,
replace them with new ones.
Installation
5 Slide the clips onto the hose first, then work
the hose all the way onto its unions as
indicated by the index marks (see illustration).
I f
the hose is difficult to push
~ $ e < ~ : " ~ o f k i . " ~ n i t
water,
:
or
alternatively a lit;
water can be
used 8s a lubrica
nor
tle soapy
I
n t.
6 Rotate the hose on its unions to settle it in
position before sliding the clips into place and
tightening them securely (see illustration).
7 Refill the cooling system and bleed it
correctly (see Section 2).
Advertisement
