Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Slide and place the palm rest and keyboard assembly on the display
assembly.
2
Using the alignment posts, press the display hinges down on the palm
rest and keyboard assembly.
3
Align the screw holes on the display hinges with the screw holes on the
palm rest and keyboard assembly.
4
Replace the screws that secure the display hinges to the palm rest and
keyboard assembly.
5
Route the display cable through the routing guides on the palm rest and
keyboard assembly.
6
Adhere the tape that secures the display cable to the palm rest and
keyboard assembly.
7
Slide the display cable to the connector on the system board and close
the latch to secure the cable.
Post-requisites
1
Replace the
wireless
2
Replace the battery.
3
Replace the
base
4
Replace the
optical
66
computer. After working inside your
card.
cover.
drive.
After working inside your