Replacing The Touch Pad; Procedure; Post-Requisites - Dell Inspiron 17 5000 Service Manual

Replacing the touch pad

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Adhere the tape that secures the touch pad to the palm rest and
keyboard assembly.
2 Align the screw holes on the touch pad with the screw holes on the palm
rest and keyboard assembly.
3 Replace the screws that secure the touch pad to the palm rest and
keyboard assembly.
4 Align the screw holes on the touch-pad bracket with the screw holes on
the palm rest and keyboard assembly.
5 Replace the screws that secure the touch-pad bracket to the palm rest
and keyboard assembly.
6 Slide the touch-pad cable into the connector and close the latch to
secure the cable.
7 Slide the hard-drive cable and I/O-board cable to their respective
connectors on the system board and close the latches to secure the
cables.

Post-requisites

1 Replace the battery.
2 Replace the base
3 Replace the optical
46
computer. After working inside your
cover.
drive.
After working inside your