Replacing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Place the power-button board on the palm rest and keyboard assembly
and align the screw hole on the power-button board with the screw hole
on the palm rest and keyboard assembly.
2
Adhere the tape that secures the power-button board to the palm rest
and keyboard assembly.
3
Replace the screw that secures the power-button board to the palm rest
and keyboard assembly.
4
Slide the power-button cable to the power-button board and close the
latch to secure the cable.
Post-requisites
1
Replace the
display
2
Replace the battery.
3
Replace the
base
4
Replace the
optical
76
computer. After working inside your
assembly.
cover.
drive.
After working inside your