Installation - BEA IRIS Setup Manual

3

Installation

1
Tips
Use the Remote-Control to
adjust the sensor.
Avoid vibrations!!!
1. DO NOT attempt any internal repair of the sensor. All repairs and/or component replacements must be performed by BEA, Inc. Unauthorized
disassembly or repair....
may jeopardize personal safety and may expose one to the risk of electrical shock

 may adversely affect the safe and reliable performance of the product
will result in a voided product warranty

2
Mounting the sensor: follow the instructions on the enclosed template
Mount the sensor at a maximum height of 2" from the bottom line
3
Wiring the sensor: wire according to the color designations (as shown below)
SENSOR
{
12-24V AC/DC
Auxiliary
Output
IR
75.5159.09 20090115
Use the Spotfinder to locate
the safety curtains.
Do not cover the sensor!
of the door operator.
Inputs / Outputs
Red
Sensor Power
Black Supply
White
Relay 1 –
Green
Auxiliary Output
Brown
Relay 2 –
Blue
Presence Output
Avoid touching optical parts!
Avoid moving objects in
proximity to the sensor! objects in the infrared field!
Use the mounting template to drill holes and position the sensor.
To ensure good water protection,
route the cable as shown above.
Make sure the operator
cover is fixed properly and
electrically grounded.
Avoid highly reflective
3/10