Camshaft Bushing - Replace - Mitsubishi S12A2 Service Manual

2.7 Camshaft Bushing - Replace

Before tightening the set bolt, be sure to check that
the set bolt is in alignment with the set bolt hole in the
camshaft bushing.
Make sure that the oil hole in the camshaft bushing is
in alignment with the oil hole from the oil gallery.
(1) Remove the camshaft bushing set bolt and remove the
camshaft bushing.
(2) Before inserting the camshaft bushing to the bushing
hole on the crankcase, be sure to check that the oil hole
and set bolt hole.
(3) Before securing the set bolt, be sure to check that the
set bolt is in alignment with the oil hole.
Chapter 6 INSPECTION AND REPAIR OF BASIC ENGINE
Set bolt
Set bolt hole
Camshaft Bushing - Install
Engine
front
Oil hole
Camshaft bushing
6-13