Embroidery Hoop - Singer 650 Manual

Free Motion Work Wth Embroidery
Hoop
Stitch Pattern Selectors: DL
Stitch Width Selector: 2-5
Sttch Length: Fine (less than I ram)
Feed Cover Plate
Presser Foot: None
Script monograms and embroidery can be
hand wheel toward you and drew bobbin
effectively accomplished with the zig-zag
thread up through fabric. Hold both thread
stitch when the tree motion principle is em-
ends and start stitching.
ployed.
Move hoop slowly, following outline of de-
A test sample should always be made before
sign. Maintain an even rate of speed so that
proceeding with the actual woik to deter-
stitches are uniformly ipaced.
mine stitch setlting and spacing. Some fabrics
Slow movement of hoop
reoduces a close
may require addition of an underlay of crisp
satin stitch; more rapid movement lengthens
lawn and organdie.
the stitch and resuets in an open effect.
Trace or mark design on right side of fabric.
Free motion work can also be done with the
Place work in embroidery hoop large enough
darning and embroidery foot. This foot is
to encompass entire design. Be sure fabric is
particularly suited for stitching smooth heavy
hold taut. Position work under needle and
fabrics since it assists in controlling the stitch
lower presser bar to engage tension. Turn
as well as in a, proper guiding of the fabric.
75