Straight Stitching - Singer 650 Manual

Straight Stitching
K
©3
Settings a e Fittings
Whcn sett not * 1
t 4, atlern selectors at AK (straight stitching) and tihe
slit(h
width
selector a
.(
ctt,
centre
needle position) you can use the following two types of
equipment,
I. General purpose throat plate and general
1purpose
presser foot.
This is the basic equipment for all utility
i
2.
-Straight stitch throat plate and straight
stitch presser foot.
This equipment should be used where ac-
("
MqO :curate
straight stitching is required, when
stitching sheer and flimsy fabrics.
This equipment requires stitch width selec-
2.
tor setting 3, otherwise the needle hits the
throat plate or presser foot and breaks.
To meet special requirements, you may wish
1
2 3
4
S 1 2
3
4 5
to place a line of stitching to the left or right
S
of center. You must use the general purpose
throat plate and presser foot in this case
* (equipment I).
Stitoh width selector setting I places sitithing
Stto the left; setting 5 places it to the righng
*
Intermediate settings may also be used.
Raise needle above fabric before moving
selectors.
22