Raising The Bobbin Thread
Now that you have threaded both the bobbin
cAse and needle, you will need to raise the
bobbin thread through tie needle holl In the
throat plate.
1- Hold needle thread li jlP I
With left hand
(thread above i resse
fool).
Turn haf,.
wheel slowly toward you so that needle
enters throat plate.
2. Continue holding needle thread and
uir
ruing hand whet I until r oedle rises ant
brings up bobbin thread in a loop. Pull the
needle thread to raise the loop to the eye
of the needle.
A./
3. Undo the loop with your finger.
A
4. Place both needle and bobbin threads dia-
gonally under presser foot, making sure
bobbin thread is located in the rear thread
guide of the bobbin case.
23