Singer 650 Manual page 9

Treadle Driv. (For
.00
Machim only)
In case that you do not have any experience in sewing with
treadle drive - first it is necessary to become familiar with
this type of drive.
Loosen stop motion screw
and
place both feet on
treadle,
Turn hand wheel over to-
ward you, allowing feet to
move freely and lightly with
motion of treadle. Practise
this motion until you are able
to re-start machine with hand
wheel turning over toward
yea Then tighten stop mo-
tion screw for normal ma-
chine drive.
8