Singer 650 Manual page 15

To Remove the Throat Plate
Raise presser lai
Turn hand wheel to raise
-
,r,
needle to Its highest position, Open slide
pla'e. Place both thumbs under throat plate
and lift plate from unladtuie.
To Insert the Throat Plate
Place th.r,.t pl it in position over two
clampirn pins anJ re ease. The magnets draw
the throcit *late intc proper position. Close
slide plaie.
To Change the Presser Foot
Turn hand whebU to raise needle to its high-
est positi "n. Rave p--sser foot. Loosen pres-
ser foot ,'-rew
i,
filt the presser foot can be
slipped from arwimd the presser bar.
Presser Foot Litter Lever
A normal lift of the presser in )t lifter level
brings it up inll position I ant, by doing so
the presser fort releases open ng a. Normal
fabrics can be easily placed uwider the pres-
3
/ser
foot.
For easier plafsing of thicker fabrics, th?
presser foot thttr !ever can be raiked further
to position 2. This raises the presser foot
to its highest pr)si-ion b.
When raising )rcsser foot li ter !ever into
position 2 you t.ust overcome t spring pres-
sure and keep the lifter le.eri
n position
since it does not lock in th
;
pc.s;tion; but
when released tle spring pressure returns
the lifter lever ir.to position I1 Be sure that
[a
the presser foot Iter lever i; set •i position
-
-.
3 before sewmCi
md
not left iit po-Ition I in
error.
14