Playback-Related Operations - Yamaha Tyros5-76 Owner's Manual

Playback-related Operations

Operations on the panel
 Selecting the previous/next Audio Song ([PREV] or [NEXT] button)
Press the [PREV] or [NEXT] button to select the previous/next Audio file in the same
folder. Hold one of them to move backward/forward continuously through the current file
(in seconds).
Pressing the [PREV] or [NEXT] button calls up the Audio Position pop-up window show-
ing the current position of the Audio file. When the window is shown on the display, you
can also use the [DATA ENTRY] dial to move backward/forward continuously through the
current file.
 Adjusting the volume balance between the MIDI Song and Audio file
Cross Fader
Lets you adjust the volume balance between MIDI Song playback and Audio file play-
back. Moving the fader leftward increases the volume of MIDI Song playback, and mov-
ing rightward increases the volume of Audio playback.
[BALANCE] button
Pressing the [BALANCE] button once or twice calls up the BALANCE (2/2) display
(page 61). In this display, you can adjust the volume balance between the MIDI Song and
Audio file by using the [2 ]–[3 ] buttons. When this is set to CENTER, the levels
of the MIDI Song and Audio file are equal. To instantly reset the balance to CENTER,
press the [2 ] and [3 ] buttons simultaneously.
NOTE
Immediately after the power is turned
on, the volume balance between the
MIDI Song playback and Audio file
playback is located at the center posi-
tion regardless of the Cross Fader posi-
tion. The volume balance can be
adjusted via both the Cross Fader and
[2 ]–[3 ] buttons in the BAL-
ANCE (2/2) display. In either case, the
actual volume balance is shown in the
BALANCE (2/2) display.
Tyros5 Owner's Manual
5
79