Table of Contents
Advertisement
3
Press one of the [A]–[J] buttons to select the desired Voice.
You can call up the other pages by pressing the buttons that correspond to the page
numbers (P1, P2 ...) or pressing the same VOICE button several times.
To listen to a short demo phrases for each Voice
Press the [7 ] (DEMO) button to start the demo for the selected Voice. To
stop the demo, press the [7 ] button again.
4
Play the keyboard.
Calling up your favorite Voices quickly
By copying your favorite or often used Voices to the USER drive, you can call
them up quickly.
1
Copy (page 32) your favorite Voice from the PRESET drive to the
USER drive.
2
Press the [EXPANSION/USER] button, then press one of the [A]–[J]
buttons to call up the Voice.
Playing Two or Three Voices Simultaneously (Layer)
1
Make sure that PART ON/OFF [RIGHT 1] button is turned on.
2
Press the PART ON/OFF [RIGHT 2] button to turn it on.
3
Press one of the VOICE buttons to call up the Voice Selection
display for the Right 2 part.
4
Press one of the [A]–[J] buttons to select the desired Voice.
5
Play the keyboard.
The Voice selected for RIGHT 1 (page 36) and the Voice selected here are
sounded simultaneously in a layer.
Voice RIGHT 3 can be set in the same way described above, by using the [RIGHT
3] button instead.
NOTE
The Voice type and its defining charac-
teristics are indicated above the Preset
Voice name. For details on the charac-
teristics, see page 39.
NOTE
You can call up the information for the
3
selected Voice by pressing the [6 ]
(INFO) button (Some Voices do not
have the information display.) To close
the information display, press any panel
button.
NOTE
Make sure that MENU 1 is shown at the
bottom right corner of the display
(page 26).
NOTE
You can save the settings to Registra-
tion Memory. See page 85.
Tyros5 Owner's Manual
1
37
Advertisement
Table of Contents
