Table of Contents
Advertisement
The keypad/terminal should not be
room temperatures above 158° F
permanently damage the display.
11. Plug the L-shaped connector into the socket
located on the top of the keypad/terminal (12V).
12. Connect the serial cable to the top of the
keypad/terminal.
Serial
Cable
13. Place the printer in the tray.
operated while resting on its side
ALWAYS PLUG THE PRINTER INTO THE
ELECTRICAL WALL OUTLET FIRST AND
THEN TURN ON THE PRINTER - NEVER
TURN ON THE PRINTER AND THEN PLUG IT
INTO THE WALL OUTLET.
operated in a location that has
or below -4° F for extended
periods of time. This could
The printer should never be
or upside down.
L-shaped
Connector
Getting Started 1-5
Advertisement
Table of Contents
