Installer Setup - Honeywell T8611G Chmnothern IV User Manual

7"8611G CHRONOTHERIVP IV DELUXE PROGRAMMABLE HEAT PUMP THERMOSTATS
SET WAKE TIMES
SETCURRENT
DAy AND TIME _
RETURN TO
NORMAL
OPERATIONS
ENTER
INDEFINITE
OR_MED
SETllNQ OR SCROLL
FORWARD THROUGH
INSTALLER SETUp OPTIONS
BACKWARD THROUGH
INSTALLER SETUp OPTLC_N8
TIMESAND
OPERA.ON
SET CURRENT OR
CHANGE BETWEEN
DAYLIGHT _VINGS
AND Sl
HEATING AND COOLING
SELECT SYSTEM
OPERATION
DAy TO ANOTHER DA_
DECREASE_ME SL_fNG
OR SCRCLLBACKWARD
THRC4JGHINSTALLER
SETUPANDSELF_EST
Fig. 6.1"8611G key locations and descriptions.
Table 2. Default Program Settings.
Heat Cool Fan
)erlod Time Setpotnt Setpolnt Setting
Wake 6:00 AM 70°F 78°F Auto
(21°C) (25.5°C)
.eave 8:00 AM 62°F B5°F Auto
(1E.5°C) (29.5°C)
Return 6:00 PM 7O°F 78°F Auto
(21 °C) (28.5°C)
Sleep 10:00 PM 62°F B2°F Auto
(t6.5°C) (28°C)
Rg. 7,T8611G System and Fan key locations.
TWO LED
INO_CATORS
Rg. 8. LEDs location.
INSTALLER SETUP
NOTE: For most applications, the thermostat factory-
settings will not need to be changed. Review the
factory settings in Table 2 and if no changes are
necessary, go to the Installer System-Test
section.
The Installer Setup is used to customize the thermostat
to specific systems. Some of the options include
temperature display, changeover and outdoor
temperature display. Installer Setup numbers are listed in
Table 3. The table includes all the configuration options
and the factory-settings for the T8611.
69-0936--1 4